PDA

View Full Version : Kinect in Dashboard


nydnh01
02-12-2012, 03:06 PM
I was wondering how is it possible to have the x and z coordinates move with the y axis on the skeletal image for the Kinect?

Mark McLeod
02-12-2012, 03:16 PM
Yes, it's possible.
You are allowed to write changes into the Kinect Server.

If you've installed the FRC Kinect Server, then the source and documents arte located on your Local Disk at: C:\\Program Files\FRC Kinect Server

I'd start by looking at the document (under docs):
Getting Started with Microsoft Kinect for FRC.pdf

JChavis
02-28-2012, 06:29 AM
Yes, it's possible.
You are allowed to write changes into the Kinect Server.

If you've installed the FRC Kinect Server, then the source and documents arte located on your Local Disk at: C:\\Program Files\FRC Kinect Server

I'd start by looking at the document (under docs):
Getting Started with Microsoft Kinect for FRC.pdf

Just Make sure that you have also installed Microsoft Visual C# Express 2010 so that you can follow along the Kinect Code Walkthrough pdf....(Below)

The Images I have attached are of course not from Visual C#, but from Notepad (which I would not recommend using), since I don't have Visual C# on the computer I am Posting to You Now!

Note: I have only started using Visual C#, so my changes may not be the complete way to change the code to include the "Z" Axis....:o . I have only followed the Walkthrough in the FIRSTGestureProcessing Section...::rtm::