Chiaphua Spec Sheet

[Joe Johnson]

I suppose that 3 days is enough time to wait for FIRST to upload the spec sheet for the Chiaphua Motors.

I got this directly from Chiaphua (knowing motor manufacturer's by name is worth something ;-)

Hope this helps.

Joe J.

[Anton Abaya]

/me bows to the god.

[Katie Reynolds]

THANK YOU!!!

- Katie

[Larry Barello]

Something seems wrong with the spreadsheet: it claims 300 oz-inch torque from the motor at stall.

Doesn't that seem just a tad high, like 10 or 20x ?Team #492 (http://www.titanrobotics.net)

[Joe Johnson]

I think is it right.

[Joe Ross]

Originally posted by Larry Barello
Something seems wrong with the spreadsheet: it claims 300 oz-inch torque from the motor at stall.

Doesn't that seem just a tad high, like 10 or 20x

remember that the stall torque is given in oz-in and not foot pounds or newton meters like the other motors.

[Larry Barello]

That would explain the 10-20x error .... ;^)

[Marc P.]

Originally posted by Larry Barello
Something seems wrong with the spreadsheet: it claims 300 oz-inch torque from the motor at stall.

Doesn't that seem just a tad high, like 10 or 20x ?Team #492 (http://www.titanrobotics.net)

When converted to the 315 oz-in of stall torque would be 2.23 nM, using 1Nm = 141.5 oz.in.

[EStokely]

Everyone is ahead of me.
I also thought that seemed high and went here to post the same question that Larry did, only to find out I can't read!
oz-inches are not foot -pounds
Thanks all
And a HUGE thanks to Joe!!!!!

Eric

[Frank(Aflak)]

bah, I can't find any other specs, can I get some linkage?

like for the other motors. . . i found them the other day, but couldn't find them again . . . .

[sanddrag]

Originally posted by Frank(Aflak)
bah, I can't find any other specs, can I get some linkage?

like for the other motors. . . i found them the other day, but couldn't find them again . . . .

This is for the motors for LAST YEAR and the Van Door from 2001.
www.team696.org/motorspecs.html

[Marc P.]

wow... old thread heh

[Brandon Martus]

Note; this thread is from last season.