PDA

View Full Version : Servo Specs


BBFIRSTCHICK
01-14-2003, 05:52 PM
Dose anyone know where I can find the specs for the Servo's that were provided in the kit??

luckyguy9205
01-17-2003, 11:18 AM
This is the Hitec HS-322 Deluxe Servo with the Hitec/JR/Z Connector.

FEATURES: Three pole motor.
One resin bushing.

INCLUDES: One Hitec Deluxe Servo with the Hitec/JR/Z Connector with, four 2mm x
15mm phillips head mounting screws, four rubber grommets, four
eyelets, one star shaped, one arm, and two arm straight servo horns

SPECS: Wire color codes: Black-Ground, Red-Power, Yellow-Signal
Operating speed: 0.19 sec @ 60 degrees at 4.8V
Torque: 39oz/in (2.8kg cm)
Weight: 1.51oz (43g)
Length: 1.57" (40mm)
Width: 0.78" (20mm)
Height: 1.43" (36.5mm)
Wire length: 12" (305mm) approximate
JXS 7/12/02
ir/kh