PDA

View Full Version : Custom Electronics Box


doteman
03-16-2002, 02:52 PM
In the rules, it is stated that a "bud box" must be used to encase a custom-made electronics board. I have not seen this box listed in any of the appendices of the rules book. Where can I find one?

Thanks
D Oteman

Joe Ross
03-16-2002, 04:32 PM
The box you are to use is listed in the additional hardware list. The part number (from Bud Industries) is PN-1324-C.

Al Skierkiewicz
03-17-2002, 01:45 PM
The box is available from Digikey under the Bud number in the previous post. Be prepared, it is more costly than you think.

kmcclary
03-28-2002, 08:17 PM
Data on the Bud Box PN-1324 may be found at:
- http://www.budind.com/cgi-bin/view?part=n4x

Direct links to the engineering drawings for the box itself are:
- PDF File: http://www.budind.com/pdf/hb1324.pdf
- DXF File: http://www.budind.com/dxf/hb1324.dxf

Enjoy! :D

- Keith McClary, Advisor, Huron High Team 830 "Rat Pack", Ann Arbor, MI

ECarlson
04-10-2002, 10:35 AM
Originally posted by doteman
In the rules, it is stated that a "bud box" must be used to encase a custom-made electronics board. I have not seen this box listed in any of the appendices of the rules book. Where can I find one?

Thanks
D Oteman

$18.50 at http://www.DigiKey.com/ enter PN-1324-C into the SEARCH box on the main page.