PDA

View Full Version : pic: 1213 TARDEC GROVES DRIVE PLATFORMS 2

groves
02-03-2006, 12:00 AM
[cdm-description=photo]22717[/cdm-description]
greencactus3
02-03-2006, 12:00 AM
very nice. looks lighter than last years.. whatkind of tires are those? ever think that the wedgetop and roughtop might be better or are those good enough?
groves
02-03-2006, 12:58 AM
Well the wheels are from NPC and they have remarkable traction. They have a durameter of around 60 (which is quite sticky). NPC makes good robot parts. you can find their products at:

http://www.robotmarketplace.com
sanddrag
02-03-2006, 01:13 AM
Are those Colson wheels, or similar to colson wheels?

Also, I'm interested in learning how you couple your axle to the dewalt tranny output. Also, is there a bearing right next to the dewalt tranny output?
Jack Jones
02-03-2006, 01:31 AM
Are those Colson wheels, or similar to colson wheels?

Also, I'm interested in learning how you couple your axle to the dewalt tranny output. Also, is there a bearing right next to the dewalt tranny output?

We use 1/2" keyed shaft with transmission end turned down to fit the 0.3 x 0.25 double-D.

Yes, a bearing on the wheel mount next to the transmission - just mirror what you see on the outside wheel mount.
Peter Matteson
02-03-2006, 07:52 AM
I thought the post said TARDIS :D