PDA

View Full Version : pic: 114 2007 Teaser

CraigHickman
02-06-2007, 08:10 PM
[cdm-description=photo]26719[/cdm-description]
Madison
02-06-2007, 08:11 PM
Happy to see that you were able to find somewhere to come through for y'all and have that stuff manufactured. There's no way we'd have done as nice a job as quickly as whoever you found to do it.
MattLi
02-06-2007, 09:26 PM
Nice wheels :D Where did you get 'em
CraigHickman
02-06-2007, 09:28 PM
Nice wheels :D Where did you get 'em

We designed them in Autodesk Inventor 10, then saved a drawing as a .dxf, and sent it to a CNC shop to have made out of Aluminum. In total, our wheels are 1.2 pounds.
Arefin Bari
02-07-2007, 01:56 AM
It's always good to see a design being fabricated and used on applications. Good luck this season.
Ericgehrken
02-14-2007, 09:26 PM
Where did you get the blue tread?
CraigHickman
02-14-2007, 09:28 PM
We're using the Nitrile roughtop from McMaster. We've used it for two years now, with no issues with attachment or wear. It serves us quite well.