View Full Version : Field Creation Help
01-13-2008, 03:36 PM
In the team drawings for the field how do you connect PVC assemble A7 with the iron pipe assembly above it?
01-13-2008, 04:24 PM
We used PVC all the way across, adjusting the PVC pipe sizes to compensate for not having the iron pipe.
We also glued all of the joints, except for two near the center and at the side posts. For those, we used nuts and bolts so that the system can be taken apart and moved if we need to.
01-14-2008, 12:02 AM
Screw the #23 black iron upright into the base. Slide PVC assembly A7 over #23. Screw iron cross #34 into place. Along with pipes #24 and #25 and elbow #35. Get everything tightened up. At this point you should have two pillars of iron pipe with a PVC covering. Turn the pipes until the ends of the two columns are close to one another. Install the union #36 and tighten everything up. You should be able to figure out the rest from there.
vBulletin® v3.6.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.