PDA

View Full Version : How many teams are really using the ir


R.C.
02-19-2008, 01:41 PM
On all the discussions on the ir, everyone says the ir jams. Is anyone planning to user the ir, we're planning to use dead reckoning autonomous

1075guy
02-19-2008, 02:49 PM
We're planning a primarily dead reckoning auto mode with some slight 'adjustments' made to it by the IR... if the IR doesnt pick up, our auto should still be worth n points, where n belongs to the set of integers > 0.

SL8
02-19-2008, 02:55 PM
If anyone is not using their IR Board... Could we use it. We will exchange anything we have that is not on the robot. We are going to the Lone Star Regional.

DarkFlame145
02-19-2008, 02:56 PM
we got ours working and plan on using it at FLR

Jetweb
02-19-2008, 03:35 PM
We are using ir, but we only expect for one comand to get through befor interferance becomes a problem

R.C.
02-19-2008, 05:54 PM
good luck guys, have fun

Fyzix Guy
02-19-2008, 05:57 PM
We are planning to use it but had not fully integrated it into our 'Bot when it went into the Box today. Hopefully, it will be all programmed and set to go by the Waterloo Regional (our only trip this year).

gurellia53
02-19-2008, 06:34 PM
We plan on using it to "nudge" the robot a bit to the left and right, and to knock the ball off the overpass

Doug Leppard
02-19-2008, 06:36 PM
We are telling the robot where the ball(s) are in the 1st few feet then the bots on its own.

nittemare
02-19-2008, 06:38 PM
we plan on using it for our entire "hybrid." we were able to practice since week 4 on the code and sending the signal

Justin Montois
02-19-2008, 06:38 PM
After reprogramming our IR, we have had good luck with it and we have a great program on it and a good Robocoach. That's about all we can control, when you could have up to six teams sending IR signals, I can foresee problems.

R.C.
02-19-2008, 06:44 PM
but doesn't anyone realize when you try it with two t.v remotes it jams?

The Megan 2207
02-19-2008, 07:17 PM
We're using ours to move left/right and get the ball off. We're using our fourth button to send it around the track until time is up. We haven't tried using multiple remotes to see if it will jam. We're hoping that it works and doesn't explode or anything...