CRio Not Responding [Archive]

Shadow_Cat

02-12-2009, 11:06 PM

Ok here is what is happening. Our CRio was responsive but now we can not get any code running. The battery voltage on the DS comes up as 00.00. I have no idea what happened. It is only a few days until shipment please help me!

airnate

02-12-2009, 11:12 PM

What happens when you try to deploy code to the cRIO by running a VI?

Shadow_Cat

02-12-2009, 11:13 PM

It loads but nothing happens.

Greg McKaskle

02-12-2009, 11:15 PM

If you just push the run button on your robotMain, what happens?

Greg McKaskle

Shadow_Cat

02-12-2009, 11:20 PM

The code deploys and our robot will not move all the lights blink and the voltage on the driver station says 00.00.

Stuart

02-12-2009, 11:29 PM

We had this happen to us after labview crashed while uploading code. Reimage the cRio then reload your code. Thats what fixed it for us

Greg McKaskle

02-12-2009, 11:45 PM

My suspicion is that you have a version problem between the cRIO and the WPI library.

If you launch the dashboard it will show errors occurring on the cRIO. I think it is -44085 that indicates a version problem. If this is your problem, reimage the cRIO to v11, and be sure to push the checkbox to reformat.

Greg McKaskle

Shadow_Cat

02-13-2009, 08:12 AM

We re-imaged it twice and nothing worked.