PDA

View Full Version : pic: New (to us) Tools for 418


Bertman
10-22-2009, 05:13 PM
[cdm-description=photo]34288[/cdm-description]

Qbranch
10-22-2009, 05:19 PM
These machines are a huge help. In 2008 we used our PlasmaCAM table to mock up our shooter, among other parts of our robot. It's really fast (8.4kW torch) to cut even in thicker stuff (1/8" sheet).

Luckily, since your machine is used, someone probably has all the magic calibration numbers written down for your torch... the members/mentors on our team who set up ours had some frustrated moments...

Have fun... I wonder what your first test part will be...

-q

p.s. when they say 'well ventilated area' and 'wear welding shields' in the manual they aren't kidding. ::ouch::

BrendanB
10-22-2009, 07:46 PM
Jealous:p

JaneYoung
10-22-2009, 09:49 PM
This is one of our valued sponsors that goes way back with the team and Mr. Bertucci. They have been there for us. It's an amazing feeling to have that kind of support and generosity. I know that many of you who read this will understand what I'm trying to say.