PDA

View Full Version : Andymark am-0654


NROBOS
01-27-2011, 07:42 PM
We ordered the Toughbox mini am-0654. It came recently and when we tried to assemble it, we realized that it didn't come with assembly instructions. Can anyone help?

JesseK
01-27-2011, 07:50 PM
Bah, it looks like AndyMark's website doesn't have them up yet. Send AndyMark an email. In the mean time, see if you can figure it out from the layout drawings?

http://www.andymark.com/ProductDetails.asp?ProductCode=am-0654

The assembly considerations are almost always the same regardless of the gearbox from AndyMark:

There is almost always a lip on the intermediary gears for the gearbox. These face outwards, toward the bearings of the gearbox
The bearings typically have flanges on them, and the flanges typically go on the inside of the sideplates
If there is slop on the shaft, you've assembled it wrong. Take your time, try it again

NROBOS
01-27-2011, 07:52 PM
Thanks a lot