OCCRA
Go to Post If all you've seen of an event is the three days of the competition, you've missed 99% of the work that made it happen. - Madison [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Events   CD-Media   CD-Spy   FRC-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 01-17-2013, 07:59 PM
technoferrets's Avatar
technoferrets technoferrets is offline
Registered User
FRC #4212
 
Join Date: Jan 2013
Location: Illinois
Posts: 5
technoferrets is an unknown quantity at this point
Axis camera setup through roborealm

We (the Techno Ferrets) are having some difficulity setting up our axis camera through roborealm. We attempted to use the setup axis camera program and originally it worked! However, there was some confusion in typing in the new password and we now no longer know it (although we think that the password and username were both reset to FRC). We then proceeded to launch roborealm. We used the axis command to attempt to setup the camera, but to we did not get any camera feed (we were using FRC as the username and password and 10.42.12.11 as the i.p. address). Please help us (preferably by listing a step-by-step setup and camera wipe). Thanks!

BTW, we can connect to the camera through the frc driver station and we have connected through the axis setup website.
  #2   Spotlight this post!  
Unread 01-17-2013, 10:03 PM
Bryce Paputa's Avatar
Bryce Paputa Bryce Paputa is offline
President
FRC #0503 (Frog Force)
Team Role: CAD
 
Join Date: Jan 2012
Rookie Year: 2008
Location: Novi Michigan
Posts: 230
Bryce Paputa is a splendid one to beholdBryce Paputa is a splendid one to beholdBryce Paputa is a splendid one to beholdBryce Paputa is a splendid one to beholdBryce Paputa is a splendid one to beholdBryce Paputa is a splendid one to beholdBryce Paputa is a splendid one to behold
Re: Axis camera setup through roborealm

We were having issues with ours, setting the user name and password both to blank fixed it.
  #3   Spotlight this post!  
Unread 01-18-2013, 01:42 AM
RoboRealm RoboRealm is offline
Registered User
FRC #0443
 
Join Date: Nov 2011
Location: United States
Posts: 32
RoboRealm is a jewel in the roughRoboRealm is a jewel in the roughRoboRealm is a jewel in the roughRoboRealm is a jewel in the rough
Re: Axis camera setup through roborealm

1. Download the latest RoboRealm version (there are a couple fixes to the Axis module)

2. Reset you camera so that you can type in a new username/password. See the Tips second at the bottom of

http://www.roborealm.com/help/Axis_Internet_Camera.php

3. Login to your camera and type in the new username/password using a webbrowser.

4. Start the new version of RR and also type in the same username/password, ip address and press the start button.

That should do it.

STeven.
  #4   Spotlight this post!  
Unread 01-21-2013, 05:35 PM
technoferrets's Avatar
technoferrets technoferrets is offline
Registered User
FRC #4212
 
Join Date: Jan 2013
Location: Illinois
Posts: 5
technoferrets is an unknown quantity at this point
Re: Axis camera setup through roborealm

Thanks, it turned out that we had to enable anonymous viewer login.
  #5   Spotlight this post!  
Unread 01-21-2013, 05:51 PM
RoboRealm RoboRealm is offline
Registered User
FRC #0443
 
Join Date: Nov 2011
Location: United States
Posts: 32
RoboRealm is a jewel in the roughRoboRealm is a jewel in the roughRoboRealm is a jewel in the roughRoboRealm is a jewel in the rough
Re: Axis camera setup through roborealm

While that will work, you will still not be able to change any of the parameters of the camera from within the RR module. If that's not needed then you are done, otherwise you'd still need to add in a username and password (required for all but viewing). Also be sure that if you do, have the most recent RR version (updated in the last couple of days).

STeven.
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:56 PM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi