Omni wheels in 2004 kit?

Salik Syed · #1 03-15-2003, 03:12 PM

I saw at FIRSTCADLIBRARY.com that they had omniwheels under mechanical ? does this mean they'll have em in next years kit ? that would be awesome!!

FotoPlasma · #2 03-15-2003, 03:27 PM

The website www.firstcadlibrary.com is, as far as I know, an entirely unofficial website, and is not associated with FIRST. Just because a part is "cadded" and on the site does not mean anything about its inclusion in the kit of parts.

Check out the "Manufactured" subsection. Think you'll see much of that in the kit, next year?

Ed Sparks · #3 03-16-2003, 09:47 PM

I drew and posted this part because we used it in our design this year. I'ts available from McMaster-Carr.

FirstCadLibrary is not an official FIRST sponsored site. It's a site I created to help all those FIRST teams who want to use the donated Inventor software to design their robots without having to spend countless hours drawing common parts. The "Manufactured" library are parts that we designed for use on our robot over the years (I'm a member of team 34).

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using an Operator Interface with the 2004 EDU RC wirelessly	Dave Flowerday	Robotics Education and Curriculum	34	04-19-2004 06:06 PM
How fast is fast to get on the hill?	ianbbat	General Forum	76	03-09-2003 08:05 PM
We need Omni Wheels!!	archiver	2001	0	06-24-2002 12:02 AM
Lots of Wheels and F = u x N	archiver	2001	17	06-23-2002 10:37 PM
"Motors and Drive train edition" of Fresh From the Forum	Ken Leung	Bulletins and Newsletters	6	01-29-2002 11:32 AM