OCCRA
Go to Post I've learned never to say never when it comes to FIRST teams. - Karthik [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Events   CD-Media   CD-Spy   FRC-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 01-29-2005, 10:47 AM
Scott358 Scott358 is offline
Engineer/Mentor
AKA: Scott3137
FRC #3137 (T-Birds)
Team Role: Mentor
 
Join Date: Jan 2002
Rookie Year: 1999
Location: Hauppauge, Long Island, NY
Posts: 149
Scott358 is just really niceScott358 is just really niceScott358 is just really niceScott358 is just really niceScott358 is just really nice
Single vs double solenoid valve operation

Since the question about operation has come up within a different thread (about wiring them), hopefully the following explains how the valves operate, and the impact on the cylinder....

A single solenoid valve has one solenoid, and shifts when voltage is supplied to that solenoid. When voltage is removed, it shifts back to a "home" position.

This means that a cylinder has a home position when hooked up to a single solenoid valve, and is in that home position when no volatage is supplied. Note that while many think of the home position as being cylinder retracted, if you switch the tubes to the opposite ends of the cylinder, the home position can be extended.

So, at the end of the game when power is cut, if voltage was being supplied to the solenoid, the cylinder will return to it's home position. If no voltage was being supplied when the game ends, the cylinder will stay in the position it was working in. Depending upon what the cylinder was doing, this may or may not be desired.

A double solenoid has two solenoids, and when voltage is supplied to one (and not the other) the valve shifts. Note that if voltage is supplied to both solenoids at the same time, the valve will stay in the position is was in (i.e. it won't shift since the solenoids will be working against each other). This is typically not desired, so make sure you remove voltage from one side when supplying it to the other.

If no voltage is supplied to either solenoid, the result will be the same as if voltage is supplied to both, in that the valve will stay in the position is was in.

What this means is that the cylinder has no home position, so when power is cut, the valve will stay where it was at that time, and the cylinder will continue to do work in the direction is was working in. Again, depending upon what the cylinder was doing, this may or may not be desired.

Hope this helps...
Scott358
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating no pressure with double solenoid? Combat Chuck Pneumatics 7 02-29-2004 09:45 PM
using single solenoid like a double SteveO Programming 14 02-02-2004 09:51 PM
multiple cyclinders from one double solenoid Ed Crammond Pneumatics 1 02-07-2003 05:49 PM
Will trade for double solenoid valve archiver 2001 2 06-23-2002 11:33 PM
Single Solenoid Valve SMC Chubtoad Technical Discussion 3 01-20-2002 02:16 PM


All times are GMT -5. The time now is 12:11 AM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi