Bumper Rules

[yarden.saa]

Can the bumpers can be as follows?

[Djur]

No - those 4" bumper sections need to be 8" long.

[Josh Goodman]

4.1.6 Bumper Rules
[R27]
Robots are required to use Bumpers to protect all exterior vertices of the Frame Perimeter. For adequate protection, at least 8 in. of Bumper must be placed on each side of each exterior vertex (see Figure 4‑1, Figure 4‑2, and Figure 4‑3).


Figure 4-1
http://frc-manual.usfirst.org/upload/4.1.6-1.jpg

Figure 4-2
http://frc-manual.usfirst.org/upload/4.1.6-2.jpg

Figure 4-3
http://frc-manual.usfirst.org/upload/4-3tu5.jpg