j.cole
19-02-2012, 17:00
We have an Axis 206 Camera on our robot and it works but every time we turn the robot off and then back on it takes several minutes (say 10-20) to turn green. If we do a manual reset of the camera it turns green almost instantly.
The camera is plugged into the d-link on the robot and powered on by the slot on the power distribution board for the camera. From the D-link to the camera is a cross over wire.
Enabling and disabling do nothing to remedy this problem.
The camera is plugged into the d-link on the robot and powered on by the slot on the power distribution board for the camera. From the D-link to the camera is a cross over wire.
Enabling and disabling do nothing to remedy this problem.