Error Codes Compilation

[kws4000]

By any chance, does someone have a comprehensive list of all current error codes for the Driver Station? We managed to find a list on zone.ni.com, but it is all the way from Jan 2010 when the DS was introduced and capability was limited.

[SuperS_5]

You should post the link to that list, even if its a bit old.

[Greg McKaskle]

If you mean errors that show up in the Diagnostics tab, those don't come from the DS, but from the robot and would vary based on the language you are using. The errors are sent back to the DS via the status messages.

Greg McKaskle

[kws4000]

You should post the link to that list, even if its a bit old.


http://zone.ni.com/reference/en-XX/help/372635F-01/frc/frc_error_codes/

[Mark McLeod]

This isn't an official 2012 list, but one I made myself from the 2012 FRC version of LabVIEW.
No promises about completeness.

[kws4000]

Well, that will help a lot!
By the by, where did you happen to look for these codes? Did you have to hunt through each and every VI?

And yes, we're still working with V2012.

[Greg McKaskle]

One place to get a list of LabVIEW errors is ...
C:\Program Files (x86)\National Instruments\LabVIEW 2012\project\errors\English.
Another is ...
C:\Program Files (x86)\National Instruments\LabVIEW 2012\resource\errors\English.

The text files contain errors for various products and toolkits that plug into LabVIEW. I'd assume the FRC ones in the first path are the primary ones you care about. 2011 and 32 bit path substitutions may be necessary.

Greg McKaskle

[Mark McLeod]

My list was extracted from the XML at Greg's first link.
("2011" instead of "2012" because Greg gets to play with this season's LabVIEW version long before the rest of us. :) )

[kws4000]

Lol, yeah I meant 2011, but code/WPILib from 2012. Who can keep all these numbers straight, never mind me, no worse than EMD....

Thanks!