Log in

View Full Version : Jaguar fried?

alange6373
18-01-2013, 16:53
Hey everyone

we were updating the firmware in a jaguar that we have and it was not accepting the updates for a while and then all of the sudden it just stopped working.

Now we cannot even have the light on the jaguar light up.
is it fried or have we just done something.
We tried to reset the jaguar to factory settings after that and it still would not work.

Suggestions?
dellagd
18-01-2013, 17:05
what methods have you tried interfacing with it on?

EDIT: Looked at the datasheet and in no case does it have "LED Off", so Im not sure what going on.
alange6373
18-01-2013, 17:08
the light on the jaguar itself is not on.
We have tried multiple things including through the 2 can internet ip address
dellagd
18-01-2013, 17:12
Does it show up on the 2CAN at all? Just to clarify this is a black jag correct?
Joe Ross
18-01-2013, 17:26
In BDC-COMM, there is a firmware recovery option. I don't know if the 2CAN implements the same interface.
alange6373
18-01-2013, 17:35
No it does not show up on 2 can at all, and yes it is a black jaguar.

I've never heard of BDC-COMM. What is it?
Ether
18-01-2013, 17:38
I've never heard of BDC-COMM. What is it?

Type this into the Google search box:

BDC-COMM site:chiefdelphi.com
joelg236
18-01-2013, 20:12
Type this into the Google search box:

BDC-COMM site:chiefdelphi.com




Or even better,"BDC-COMM" site:chiefdelphi.com
Ether
18-01-2013, 21:07
Or even better,

"BDC-COMM" site:chiefdelphi.com

Yes. Thank you.
alange6373
18-01-2013, 22:41
Thank you

I will try that out.
cgmv123
19-01-2013, 00:00
Let's back up. Did you power it backwards? (That's the easiest way to fry a Jaguar.)
MagiChau
19-01-2013, 00:05
Let's back up. Did you power it backwards? (That's the easiest way to fry a Jaguar.)

I think the term would be "bricked" at least that is what I am familiar with to describe his problem. The Jaguar failed durng a firmware update possibly leaving it with no firmware at all to run.