pic: 334 Shooter Hint

[Becca334]

[cdm-description=photo]38407[/cdm-description]

[sdcantrell56]

Looks nice. What brand of plasma cutter do you have?

[CidTeach]

Looks nice. What brand of plasma cutter do you have?

PlasmaCAM 4x4. Hypertherm 65A torch. Massive compressor.

[thisOrrthat]

Basketball shooting hood?

[stryker0603]

That's the top plate of a curved shooter that even has a mounting point for an encoder. :cool:

[Becca334]

That's the top plate of a curved shooter that even has a mounting point for an encoder. :cool:

I wouldn't call it the top plate per say. :p

[sdcantrell56]

Looks like its giving impressive cut quality. We are still trying to dial ours in that well.

[CidTeach]

Looks like its giving impressive cut quality. We are still trying to dial ours in that well.

Best thing we did, was get a piece of material you would typically cut/use (ours is 6061 or 5053 1/8" AL) and make a series of small parts making small changes to the heat and speeds as per torches guide. hypertherm does a great job of tabulating all speeds/feeds/amperage ratings. once you're happy with what a flying torch will do at 150ipm you're set!

[hunterteam3476]

[cdm-description=photo]38407[/cdm-description]

I know what your doing, your doing the 90 degree single wheel shooter