cRIO Modules

[robohuskies2574]

Our team is in need to change the default cRIO module locations in order for our intended plan to work, otherwise we have to slave away to move the locations of almost all of our electronics. For example, we want to move modules 9201 and 9403 from slots 1 and 2 to slots 7 and 8. Is it possible to change these modules' locations, if so how? Thanks.

By the way, we're using LabView.

[ferret_guy]

I don't think so if I understand correctly it is encoded in the fpga for generating pwm and safety protocol implmanation

[plnyyanks]

Our team is in need to change the default cRIO module locations in order for our intended plan to work, otherwise we have to slave away to move the locations of almost all of our electronics. For example, we want to move modules 9201 and 9403 from slots 1 and 2 to slots 7 and 8. Is it possible to change these modules' locations, if so how?

If you're using an 8 slot cRIO, you can define your components on (Analog/Digital/Solenoid) Module 2. You'll have to, however keep the same order of modules:
9201: Slot 1 or 5
9403: Slot 2 or 6
9472: Slot 3 or 7

[Joe Ross]

If you're using an 8 slot cRIO, you can define your components on (Analog/Digital/Solenoid) Module 2. You'll have to, however keep the same order of modules:
9201: Slot 1 or 5
9403: Slot 2 or 6
9472: Slot 3 or 7

Except that R71 requires the 9201 in slot 1 and R64 requires that the 9403 in slot 2.

[DonRotolo]

Is it possible to change these modules' locations?Possible? Probably. Allowed for competition? Sorry, no.