Pumper noodle out of the wood backing

[bumblebee3339]

We have 2 wood backings of 8" which create a corner on the robot.
Now, we need to extend the noodle out of the wood backing in order to close the corner.

Like this:
http://up367.siz.co.il/up1/dwrjmjidjmmm.png

Is that legal?
Thx

[DominickC]

Per R24

http://frc-manual.usfirst.org/upload/images/2013/1/Figure4-3.jpg

Per R27

http://frc-manual.usfirst.org/upload/images/2013/1/Figure4-5a.jpg

The middle image of the bottom row in R27 might interest you. You could cut a section of the pool noodle out where it comes in contact with the corner.

[jvriezen]

We have 2 wood backings of 8" which create a corner on the robot.
Now, we need to extend the noodle out of the wood backing in order to close the corner.

Like this:
http://up367.siz.co.il/up1/dwrjmjidjmmm.png

Is that legal?
Thx

You are fine. The R27 picture cited is a picture of plywood, not noodle. Don't cut the noodles out of your corners or you will be putting them back in at competition.