View Full Version : Shorts?
Alan2338
15-04-2013, 01:02
Going to championships, I know many students on our team are planning to bring/wear shorts. It is hot in the arena, and personally, being on the drive team, I wouldn't mind wearing them. The controversy on our team is, are they safe?
For a few years, we have always said no shorts, and had always said it was a FIRST rule. Looking through the safety manual, I so no mention to pants vs. shorts.
I know our driver wore shorts to Midwest, and there was no problem, but we didn't know what is actually allowed.
We want to be as safe as possible, and I would like your thoughts on the matter, and/or what the actual ruling is.
Thank You!
-Alan
2338
Going to championships, I know many students on our team are planning to bring/wear shorts. It is hot in the arena, and personally, being on the drive team, I wouldn't mind wearing them. The controversy on our team is, are they safe?
For a few years, we have always said no shorts, and had always said it was a FIRST rule. Looking through the safety manual, I so no mention to pants vs. shorts.
I know our driver wore shorts to Midwest, and there was no problem, but we didn't know what is actually allowed.
We want to be as safe as possible, and I would like your thoughts on the matter, and/or what the actual ruling is.
Thank You!
-Alan
2338
In the volunteer manual it says not to wear shorts but I see several volunteers wear them and it is not enforced. If it makes you comfortable I say go ahead and wear them.
I'm pretty sure there's only a rule against open toed shoes...and a societal rule against Crocs.
You can consult the Safety Manual (http://www.usfirst.org/sites/default/files/uploadedFiles/Robotics_Programs/FRC/Game_and_Season__Info/2013/2013_FRC_Team_Safety_Manual_Final_rev_B.pdf) on this. A quick search only produces to refrain from wearing jewellery, baggy clothes, ties, etc...
I'm pretty sure I remember a broadcast of Championships where teams wore shorts no problem.
(Shorts are shown here) (http://www.youtube.com/watch?v=i1QyM9WTF18)
CENTURION
15-04-2013, 01:23
Honestly, if you're not in a machine shop where 300+ degree steel chips are flying around, I don't see any reason why shorts would be a safety issue.
I say go for it.
Wear your shorts under a pair of pants, and take the pants off when you aren't in the pits or driving. Bonus points if you use your robot building knowledge to build a pair of well-ventillated pants with underglow.
JeffersonMartin
15-04-2013, 01:27
Wear your shorts under a pair of pants, and take the pants off when you aren't in the pits or driving. Bonus points if you use your robot building knowledge to build a pair of well-ventillated pants with underglow.
Snap away pants? Snap away pants.
Honestly, if you're not in a machine shop where 300+ degree steel chips are flying around, I don't see any reason why shorts would be a safety issue.
If you're just standing, I'd say that's fine. But there are all sorts of metal chips and other things on the floor of the pits, and I'd hate to kneel on a metal chip if I'm in a hurry.
I know a lot of people are comfortable wearing shorts around robots, but I'm personally not and try to wear jeans when I can (exceptions being IRI and MARC, because I sweat in those gyms just from standing still).
CENTURION
15-04-2013, 03:50
If you're just standing, I'd say that's fine. But there are all sorts of metal chips and other things on the floor of the pits, and I'd hate to kneel on a metal chip if I'm in a hurry.
Fair point.
DELurker
15-04-2013, 06:55
If you're just standing, I'd say that's fine. But there are all sorts of metal chips and other things on the floor of the pits, and I'd hate to kneel on a metal chip if I'm in a hurry.
It is our team policy to always have long pants at events for safety for reasons just like this. Screws, rivets, pins, etc all can end up on the floor in the heat of the moment and knees are notoriously delicate relative to metals or wood...
Jay O'Donnell
15-04-2013, 06:56
I've always worn shorts to FIRST competitions (even the cold ones because I'm stubborn) and I've never had a problem. I can understand thinking it might be safer with pants, but it does get pretty hot in the pits, and overheating is just as much as a problem.
If they are going to enforce long pants then they must enforce sleeves. In the pits it always seems like forearm injuries are more common.
If they are going to enforce long pants then they must enforce sleeves. In the pits it always seems like forearm injuries are more common.
They'd rather enforce glasses and shoes more than what pants you are wearing.
Jimmy Nichols
15-04-2013, 07:22
Our team policy has always been long pants for those working in the pits, drive and pit crews. Those cheering, scouting, or occasionally in the pits are welcome to wear shorts.
I don't like long sleeve rules because of the danger of getting caught up in a machine or power tool.
I haven't seen anyone faulted for wearing shorts at a competition. I would just make sure that they went below your knees so that when you do kneel down, they are protected from whatever's on the ground
ice.berg
15-04-2013, 13:40
Me being from Minnesota anything warmer than 40 F is shorts weather! :p So I wear shorts all the time at events. I have never been asked to change into pants by any of the event staff at regionals or at worlds so I assume it is fine. But of course have to follow the team dress code... ZUBAZ!!
http://farm9.staticflickr.com/8383/8622057655_11f3802ab9_n.jpg
Joe Ross
15-04-2013, 13:59
Here's what 358's drive team wears:
http://www.team358.org/history/2010/photos/sbpli/IMG_7517.jpg
http://www.team358.org/history/2012/photos/sbpli/P1010884.jpg
protoserge
15-04-2013, 14:47
We enforce pants as part of our team uniform. I had no problem with temperature at the arena or pits the last 2 years and don't expect it to be any different this year.
In general, anyone actively working on the robot should wear pants because it's the smart thing to do.
My personal opinion is I do not like shorts in the pit area. This is just a personal preference that I try to enforce on our team. It's a safety think in my mind for the reasons that others have mentioned.
On a side note I also don't like morph suits either. I've actually tried to get students to take the hoods off if they are in the pits.
Although I do agree that I would rather enforce shoes, glasses, hair and extremely low hanging jewelry around the robot than nitpick about shorts.
When I was a student on the team I was 1 of the 2 (only 2 our team has every had in the 8 years of existence) cheerleaders on the team. I got permission to wear my uniform around the arena for the events. On that same line if I was wearing my skirt I always had pants underneath while in the pits.
Travis Hoffman
15-04-2013, 21:13
I wore shorts to Finger Lakes in February and liked it.
I've worn them for 13 years and have suffered no significant injuries whilst working in the pits. Of course, I leave all the mucking around on the floor to the mechanical folks. :-)
Here's what 358's drive team wears:
http://www.team358.org/history/2010/photos/sbpli/IMG_7517.jpg
http://www.team358.org/history/2012/photos/sbpli/P1010884.jpg
It has escalated quite a bit...
http://dl.dropboxusercontent.com/u/19816150/20130405_165430.jpg
edit: Last year I was asked to change on the grounds that the shorts were unsafe.
Justin Montois
15-04-2013, 23:13
I haven't worn pants to a robotics competition in about 4 years. No one has said a word.
This is how we roll
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/485918_4594097257804_1234986264_n.jpg
On a side note I also don't like morph suits either. I've actually tried to get students to take the hoods off if they are in the pits.
I 100% agree with morph suits being unsafe. Having worn a few of them, I can attest that the visibility varies from suit to suit, but it's still impairs your vision. Not to mention that there's no way for someone looking at you to know where your focus is - they don't know if you're deep in thought, or waiting a few more seconds to move out of the way of the robot headed your way.
CENTURION
16-04-2013, 00:14
If they are going to enforce long pants then they must enforce sleeves. In the pits it always seems like forearm injuries are more common.
Long sleeves are a big no-no when working with machinery. If your arm brushes up against a moving chain (which it shouldn't because your hands should not be in the robot while it is on), the chain might scratch you a bit. But a sleeve can get caught in the chain, and pull your arm (and the rest of you) in.
That sounds bad enough, but think about doing that on an engine lathe ::ouch::
dtengineering
16-04-2013, 00:36
It would seem that as far as "safety" is concerned, the weight of the fabric is likely more important than the length of the fabric.
There are many "pants" that although they cover your skin to your ankles offer essentially no protection because of their light weight cloth.
Then there are shorts made of sturdy denim that offer a reasonable amount of protection against nicks, abrasion and minor cuts all the way down to your knees...
Jason
gabrielau23
16-04-2013, 00:55
In general if you're working in the pit, I would say wear jeans. This is especially true if you have machine tools in the pits, i.e., band saws, drill press, or belt sanders. But if you're on drive team or just in the stands, I would say go for it, although it would unfortunate if something flying hit your legs while walking through the pit area.
With all this flying debris in the pits, maybe we should add hard hats as well. ;)
Our team has a no shorts at competition rule, but I don't really see is as a safety issue. In terms of our pit crew, they should already know the clothing that is safe/unsafe in the pits. The rule there is don't do it. I don't argue with them about what is on the list at any given moment.
I have worn shorts at competitions for as long as I can remember, both as a mentor and a volunteer.
Perhaps I am in the minority on this but I always get really warm at regionals even though almost all the events I go to are in the winter months in NE.
With all this flying debris in the pits, maybe we should add hard hats as well. ;)
With the frisbees this year I invested in a purple hard hat which is the team I mentor's color. I wore it all competition, with the exception of when one of my students traded me his Stetson for it, even though it did not match my red RPC shirt.
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.