one more thing i have to ask

[archiver]

Posted by Stephen Riley at 1/19/2001 6:33 PM EST


Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.



also can anyone tell me the height of the horizontal bar above the base of the goal? i think i did my math wrong, but as i said i'm not the brightest :) pretty scary considering i'm an enginner :)
-Steve
BallBoy

[archiver]

Posted by Ed Sparks at 1/19/2001 7:13 PM EST


Coach on team #34, The Rockets, from Bob Jones High / New Century High and DaimlerChrysler.


In Reply to: one more thing i have to ask
Posted by Stephen Riley on 1/19/2001 6:33 PM EST:



The Kee Klamp catalog indicates that the distance from the bottom of the KK70-7 (top surface of the plywood) and the centerline of the pipe that makes up the handle should be 2.5"

[archiver]

Posted by Stephen Riley at 1/19/2001 7:34 PM EST


Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.


In Reply to: Re: one more thing i have to ask
Posted by Ed Sparks on 1/19/2001 7:13 PM EST:



: The Kee Klamp catalog indicates that the distance from the bottom of the KK70-7 (top surface of the plywood) and the centerline of the pipe that makes up the handle should be 2.5"

thank you, very helpful

[archiver]

Posted by Anton Abaya at 1/19/2001 11:36 PM EST


Coach on team #419, Rambots, from UMass Boston / BC High and NONE AT THE MOMENT! :(.


In Reply to: one more thing i have to ask
Posted by Stephen Riley on 1/19/2001 6:33 PM EST:



i'm a darn CS student....i drill with a keyboard for heaven's sake! :)

-anton