archiver
23-06-2002, 23:43
Posted by Justin Ridley at 1/27/2001 10:47 AM EST
Engineer on team #221, MI Roboworks, from Michigan Technological University.
We've got our bridge built, but I'd like to check a dimension to make sure we've got everything ok. What is the distance from the carpet to the bottome point of one of lower side flanges. . .when the goal is in the tilted position. The flange is not parrallel to the floor at this position so measure the lowest point. Thanks a lot, this will be a big help.
Justin Ridley - MI Roboworks
Engineer on team #221, MI Roboworks, from Michigan Technological University.
We've got our bridge built, but I'd like to check a dimension to make sure we've got everything ok. What is the distance from the carpet to the bottome point of one of lower side flanges. . .when the goal is in the tilted position. The flange is not parrallel to the floor at this position so measure the lowest point. Thanks a lot, this will be a big help.
Justin Ridley - MI Roboworks