Log in

View Full Version : Air compresser wiring

James Douthit
24-01-2014, 19:09
Do air compressors need to have a motor controller? We are unsure which type of motor controller (talon, spike, etc...) we would reasonably need, if any.
kevin.li.rit
24-01-2014, 19:10
Spike Relay and spike relay only.
MrBasse
24-01-2014, 19:21
Spike Relay and spike relay only.

With a 20 amp breaker to replace the 20 amp fuse.
Doc Wu
25-01-2014, 22:02
With a 20 amp breaker to replace the 20 amp fuse.

That is an option, but is not required.
cgmv123
25-01-2014, 22:44
That is an option, but is not required.

But it's very, very recommended.
Al Skierkiewicz
25-01-2014, 23:27
But it's very, very recommended.
Add "Al recommended". The Thomas Compressor has a start current of 25 amps, guaranteed to trip the fuse eventually. IFI suggested this addition long ago.