pic: 3D printed 8-Slot cRio Digital Sidecar table

[Kettering]

[cdm-description=photo]39415[/cdm-description]

[dellagd]

Are you still able to fit the solinoid module in with this? I looks like you can...

Very, very cool. :cool:

[Kettering]

No, it only allows for two cards. We use the card guides inside to help secure the table in. You coudl probably move the legs in to allow for a 3rd card. We just posted the .step file so you can easily edit the table to use your own numbers.

Note: The holes are not perfect from table to digital sidecar, but this was done so that the leg would fit against the empty slots, making a tight fit. Use zip ties to connect the DS to table for best results.

Here's the link to .step and .stl files. http://www.thingiverse.com/thing:237694/ (http://www.thingiverse.com/thing:237694/)

[IVAN]

Nice! just downloaded your CAD off of thingeverse and am making some edits, quick question when you printed it what machine did you use and did you raft it ?

[Kettering]

We printed this with our Makerbot Replicator 2. We printed right to the table, no raft, structure, etc.