Time to wire ;)

[RonnieS]

If you have a nice chart, your gunna have a good day;)

https://drive.google.com/file/d/0BxNARtBSUIkkNGEyLTF5RFQ5NVU/edit?usp=sharing

[philso]

If you have a nice chart, your gunna have a good day;)

https://drive.google.com/file/d/0BxNARtBSUIkkNGEyLTF5RFQ5NVU/edit?usp=sharing

Yes, you will!

At work, we use drawings similar to that to tell the assembly staff how to install all the wiring.

[Tem1514 Mentor]

Try wiring this :)
This is not an FRC item but is used as the control system to do speed trap timing down to 1 mill second.

[RonnieS]

Try wiring this :)
This is not an FRC item but is used as the control system to do speed trap timing down to 1 mill second.

FRC robots are enough for me ;) That seems tempting though!

[Tem1514 Mentor]

Here is what it looks like after the wiring is finished minus one of the two boards.

Really a fun project for timing radio controlled model boats at over 100MPH :eek:

[Paul Copioli]

If you have a nice chart, your gunna have a good day;)

https://drive.google.com/file/d/0BxNARtBSUIkkNGEyLTF5RFQ5NVU/edit?usp=sharing


If that chart is accurate, then you either have one too many MiniCIMs or one too many BAG Motors.

You have 3 BAGs and 2 MiniCIMs in that diagram. You can only have a maximum of 4 total, in any combination (4-0, 0-4, 3-1, 1-3, 2-2)

[Ether]

If that chart is accurate, then you either have one too many MiniCIMs or one too many BAG Motors.

You have 3 BAGs and 2 MiniCIMs in that diagram. You can only have a maximum of 4 total, in any combination (4-0, 0-4, 3-1, 1-3, 2-2)

Game Manual (http://frc-manual.usfirst.org/viewItem/3), Paragraph 4.7, Rule R29, Table 4-1, blue box.

[goofy173]

If you have a nice chart, your gunna have a good day;)

https://drive.google.com/file/d/0BxNARtBSUIkkNGEyLTF5RFQ5NVU/edit?usp=sharing

That is really cool. What program did you use to create it?