philso
12-02-2014, 00:49
We now have two Electronics Panels almost ready to install. They are a big step forward compared to what has been done in the past. We still have some improvements to make in order to catch up with the ones that 610, 4481 and others have made.
https://plus.google.com/photos/113252386277699028908/albums/5979376046672580401?authkey=CIuO48jZkMu-YQ
Some of the Victors were removed from the one with the black side panels so that the sockets for the PWM cables could be repaired.
The panels will be mounted between the inner frame rails so that everything faces downwards. A polycarb panel will be mounted on the very bottom for protection.
All the signal wires are labeled using wire markers purchased from Home Depot (thanks to Matthew Lang of 610 for the tip).
There are extra connections brought out from the PDB and the DSC for future expansion.
https://plus.google.com/photos/113252386277699028908/albums/5979376046672580401?authkey=CIuO48jZkMu-YQ
Some of the Victors were removed from the one with the black side panels so that the sockets for the PWM cables could be repaired.
The panels will be mounted between the inner frame rails so that everything faces downwards. A polycarb panel will be mounted on the very bottom for protection.
All the signal wires are labeled using wire markers purchased from Home Depot (thanks to Matthew Lang of 610 for the tip).
There are extra connections brought out from the PDB and the DSC for future expansion.