Light?

[NickRobischeau9]

My team was wondering about the light.

Are there any specific rules on the orange blinking lights location?

REPLIES ARE NEEDED AS SOON AS POSSIBLE

[notmattlythgoe]

My team was wondering about the light.

Are there any specific rules on the lights?

REPLIES ARE NEEDED AS SOON AS POSSIBLE

Which light? You're going to have to be more specific.

[RamZ]

My team was wondering about the light.

Are there any specific rules on the lights?

REPLIES ARE NEEDED AS SOON AS POSSIBLE

What do you mean by

the light.
?

Are you referring to the blinking orange light? One of a speed controller?

[NickRobischeau9]

YES THE ORANGE BLINKING LIGHT

[notmattlythgoe]

R63
ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:

mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO,
and wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

[RamZ]

YES THE ORANGE BLINKING LIGHT


What do you want to know about it?
Please explain all that you want to know, or it'll be hard for us to help you.

[Whippet]

ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:


mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.




These are the rules.

EDIT: Bah, notmattlythgoe beat me to the punch...

[NickRobischeau9]

THe location of the Light like how high and where

[notmattlythgoe]

THe location of the Light like how high and wear

As long as it is visible by someone standing 3 feet in front of the robot it doesn't matter where.

[Whippet]

ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).

Any RSL must be:


mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.

See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.



(Emphasis mine)

EDIT: Beat to it again. :rolleyes:

[NickRobischeau9]

Thanks For the Help