Andrew Lawrence
22-06-2014, 17:56
Hello all - I've made a CAD library for every VEXPro/WCP and most AndyMark gears. Mainly the one's you'll all likely be using. The download link to the folder can be found here (https://drive.google.com/file/d/0BxNpey1R08BIZlM1R1RJZVlzOWc/edit?usp=sharing). The library contains 180 gear files, split between native Solidworks files and STEP files (sorry, I only have access to Solidworks to make files).
Inside the main folder is a Read Me text file. There's some pretty useful information about the library on there, so please take a short glance at it.
I hope some of you find this helpful, and will be surprised about many gear sizes and combinations that you may not have known about before (like I was when making this library).
VEXPro/WCP gear CAD is credited to VEXPro and West Coast Products. Unfortunately there is very little CAD for AndyMark gears, so I had to make most of those myself. That being said, credit to AndyMark for providing some information on their gears that allowed them to be modeled.
Thank you for using my library, and if you have any questions/comments/concerns, feel free to contact me via methods posted in the Read Me text file or through this thread.
Inside the main folder is a Read Me text file. There's some pretty useful information about the library on there, so please take a short glance at it.
I hope some of you find this helpful, and will be surprised about many gear sizes and combinations that you may not have known about before (like I was when making this library).
VEXPro/WCP gear CAD is credited to VEXPro and West Coast Products. Unfortunately there is very little CAD for AndyMark gears, so I had to make most of those myself. That being said, credit to AndyMark for providing some information on their gears that allowed them to be modeled.
Thank you for using my library, and if you have any questions/comments/concerns, feel free to contact me via methods posted in the Read Me text file or through this thread.