Anyone else missing the pdp terminal cover?

[jwhite]

Our students went to wire the power distribution panel today, and we seem to be completely missing the terminal cover.

They swear they didn't misplace it. Has anyone else had that problem?

Cheers,

Jeremy

[Mark McLeod]

Do you have the two fuses and the two bolts for the power lugs?
Since they all should have come together in a small bag packed in with the PDP you may be missing more.

[jwhite]

Do you have the two fuses and the two bolts for the power lugs?
Sine they all should have come together in a small bag packed in with the PDP you may be missing more.

Ah, yes, the fuses were missing as well, so that explains it. The students responsible claim there was no such bag, but we'll do another hunt for it at our next meeting, and report it as missing if it doesn't turn up.

Cheers,

Jeremy

[Al Skierkiewicz]

It is a tiny bag.

[martin417]

And do NOT attempt to use 1/4" screws. You have to use the M6 screws or you will destroy the PD.

[Mark McLeod]

Here is what the bag looks like and what's in it.

[jwhite]

Here is what the bag looks like and what's in it.

Aweseome! That's very helpful!

Cheers,

Jeremy