We need help finding this piece

[hwu24110]

Would anyone know where we can obtain more bars/channels like this? Has it been discontinued?

[Joe G.]

Pretty sure that's just a standard piece of extruded U-channel, not something made specifically for FIRST. Dimensions would help us help you find it.

[Mike Marandola]

As an example, check for 9001K54 on McMaster. It's 2"x1" 6063 because I'm not sure what your exact application or size is. I would encourage you to check your local metal distributor since they would have the best prices.

[MrRoboSteve]

If it's easier to source, you could get some tube and cut one side off, if you need it to be open on one side.

Dimensions would be helpful.

[hwu24110]

The dimensions for the piece we have are 1/2 in. wide and 1 in. tall. The metal itself is 1/16 in. thick. Or if necessary, in centimeters, it was roughly 1.2 cm wide, 2.5 cm tall, and .1 cm thick.
I'll look for it on McMaster, thanks. For clarification, the leg length is what I described as the "tallness", right?

[Joe G.]

Here you go. (http://www.mcmaster.com/#9001k24/=w6lnoy)

[hwu24110]

Oh, thanks for providing the link.