JMSRobots
12-01-2016, 15:18
Hello All!
Our team has been experiencing some difficulties detecting the Modern Robotics Core Device Interface Module. If it helps, we are using a hybrid of parts from the old NXT setup and parts from the new Android setup. Here are the steps we followed to detect the Core Device Interface Module.
Open FTC Robot Controller App
Open the Menu
Tap Settings
Tap Configure Robot
Then tap New
Then tap Scan
Below is an image showing what appears when we Scan for Devices.
http://s27.postimg.org/wjm0wtohf/Screenshot_2016_01_12_15_06_44_1.png
Below is an image showing our robot. Take note that the Core Device Interface is receiving power.
http://s28.postimg.org/3mezmg0ot/IMG_20160112_151808_1.jpg
Many Thanks,
JMSRobotics
Our team has been experiencing some difficulties detecting the Modern Robotics Core Device Interface Module. If it helps, we are using a hybrid of parts from the old NXT setup and parts from the new Android setup. Here are the steps we followed to detect the Core Device Interface Module.
Open FTC Robot Controller App
Open the Menu
Tap Settings
Tap Configure Robot
Then tap New
Then tap Scan
Below is an image showing what appears when we Scan for Devices.
http://s27.postimg.org/wjm0wtohf/Screenshot_2016_01_12_15_06_44_1.png
Below is an image showing our robot. Take note that the Core Device Interface is receiving power.
http://s28.postimg.org/3mezmg0ot/IMG_20160112_151808_1.jpg
Many Thanks,
JMSRobotics