Log in

View Full Version : Getting the new lifecam hd-3000 to work

Ronso007
18-01-2016, 13:22
Hey Guys,

We tried to connect our new USB camera (microsoft Lifecam hd-3000) to one of the USB ports(we tried both of them) of the Roborio and run the Driver Station.
We chose the 'USB SW/HW' Options and neither of them shown anything.

The camera itself works - while trying to run it through the computer we were able to see the camera broadcast...

Any suggestions?..:confused: :confused:
Jonathan L.
18-01-2016, 13:45
Do you have code running on the roboRIO? The default (LabVIEW) robot project has code in it that forwards the camera image to the dashboard.
Ronso007
19-01-2016, 07:18
Do you have code running on the roboRIO? The default (LabVIEW) robot project has code in it that forwards the camera image to the dashboard.

We got it to work :D
Thanks!
matthewdenny
20-01-2016, 19:05
We have the same issue of no camera feed. We are a Java team. Any suggestions?
Ronso007
21-01-2016, 16:00
Well, first of all check if the camera is working at all, without the roborio.
Then, you need to download Code to your robot and run it, you should see a broadcast..
(We use labview, I have no idea how to get it work in java but this ^ works for me)