View Full Version : pic: 2929's Forklift + Climber, almost operational
[cdm-description=photo]42699[/cdm-description]
JohnFogarty
31-01-2016, 20:47
I hope you've done the math on the volume of air those cylinders you've chosen will need to extend and then retract.
We have. We debated over what ways we can deploy a winch, but in the end we decided to re-purpose the air cylinders we already had as the deploying mechanism.
They only extend, we'll be using the rest of the forklift to lift the bot (more importantly, the bumpers) over the line.
I hope you've done the math on the volume of air those cylinders you've chosen will need to extend and then retract.
Did this early on.
As it happens, if you use 1.5''-bore, 2'-stroke cylinders and run them out at 30PSI and in at 60PSI, you're more than covered with two black clippard tanks.
MichaelBick
01-02-2016, 02:43
Did this early on.
As it happens, if you use 1.5''-bore, 2'-stroke cylinders and run them out at 30PSI and in at 60PSI, you're more than covered with two black clippard tanks.
PSI drops as you use your tanks. So at some point you won't get quite the full force of your actuators.
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.