View Full Version : pic: Team 1305's second robot.
Median240
09-02-2016, 00:15
[cdm-description=photo]42750[/cdm-description]
KohKohPuffs
09-02-2016, 00:57
Out of curiosity, why did your team choose colsons over pneumatic wheels (from this angle, it looks like you're using colsons, although a mixture of both could be possible)
jajabinx124
09-02-2016, 01:10
Looking good!
cbale2000
09-02-2016, 01:11
Do my eyes deceive me or is this a 14 wheel drive system? Based on the size of the wheels and the number of axles and bearings it would appear to be. :cool:
Have any issues getting that arm to clear the bumpers? Looks like a pretty tight fit if I'm understanding how it works correctly? Also, what are you at for weight? Looks like you're using some pretty thick aluminum.
Tmeziere
09-02-2016, 01:42
Do my eyes deceive me or is this a 14 wheel drive system? Based on the size of the wheels and the number of axles and bearings it would appear to be.
If I am looking at it right it is a 14 wheel drive on 4in colsons in an arc shape. It looks awesome :)
Median240
09-02-2016, 03:04
You guys aren't wrong. It is 14 powered wheel drive using 4" wheels. We choose this design to try and disable the defences as well AS a track without having the extra difficuly and breakability. And our choice has been very good.
The intake arm clears the bumpers by ~ 1/4". It is very close. There is very little space anyways on this robot.
We choose to colon performa wheels for their durability and robustness. We didn't choose pneumatic tire for 2 main reasons; cost (30+dollars per wheel), and the reduced driving capability when not crossing a defence.
Nick Lawrence
09-02-2016, 07:30
What's the weight as pictured?
Looks good. I like the Intake deployment style. What constraints led to that choice, instead of an intake that folds out?
-Nick
Median240
09-02-2016, 07:39
Looks good. I like the Intake deployment style. What constraints led to that choice, instead of an intake that folds out?
-Nick[/QUOTE]
The biggest factor that led us to this design was space. To get the amount of reach we wanted with a fold out designated would Nyerere wit our shooter wheels.
Lil' Lavery
09-02-2016, 13:37
I should have purchased stock in Colson. :rolleyes:
Nice robot! That shooter looks really similar to ours. What angle does the ball leave at? How's your consistency been?
It looks at first glance more like a printing press or copier with the cover removed than an FRC robot. Not a bad thing, just curious. Definitely a clean, consistent look.
Are there three belts connecting the front roller shaft with the middle one, or are there interruptions in one or both of those shafts?
Median240
09-02-2016, 22:19
It looks at first glance more like a printing press or copier with the cover removed than an FRC robot. Not a bad thing, just curious. Definitely a clean, consistent look.
Are there three belts connecting the front roller shaft with the middle one, or are there interruptions in one or both of those shafts?
No. They connect to the rearguard shaft to drive the wheels on it.
No. They connect to the rearguard shaft to drive the wheels on it.
That didn't answer my question. Is there only one forward shaft, and only one middle shaft (what I guess you're calling rearguard), or are those shafts interrupted somewhere between the obvious bearing plates? If they are both solid shafts, why three belts? If they are interrupted, why were they interrupted?
PowerfulKitty
10-02-2016, 00:42
What about bumpers? Does your intake come in?
Median240
10-02-2016, 06:58
That didn't answer my question. Is there only one forward shaft, and only one middle shaft (what I guess you're calling rearguard), or are those shafts interrupted somewhere between the obvious bearing plates? If they are both solid shafts, why three belts? If they are interrupted, why were they interrupted?
OK I misunderstood you question the first time. Yes there is on forward shaft and on middle shaft. Neither r of These are interested, and the reason for the 3 belts is to guide the ball to the middle set of rollers. This was done because on tended to make the ball intake more off centre. The middle roller is there to bring to ball into the robot.
And where I said rearguard I meant rearward or the middle shaft.
Hopefully this answers your questions.
Median240
10-02-2016, 07:00
What about bumpers? Does your intake come in?
Yes. It slides on rails in and out. When in the close position the front of the intake is fully inside the frame. If you look closely at the plates which hold the intake you can kind of see the sliders.
Hopefully this answers your questions.
Yes, thanks. The angle is rather extreme; I did not see that the belts were centered over the intake area. Now that I'm looking for it, it's almost obvious.
Median240
10-02-2016, 16:05
Yes, thanks. The angle is rather extreme; I did not see that the belts were centered over the intake area. Now that I'm looking for it, it's almost obvious.
When we get it fully built I plan to put a few videos of it in action up, so that might clear up anything else.
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.