PWM

[nlt5]

We have used all of our PWM slots on the rio and we need one more. Can anyone tell me if we are allowed to use a splitter to run two servos on one PWM port?

Thanks

[Arhowk]

Yes that is legal. You cannot split PDP power but you can split PWM signal

[Ari423]

You can also use an MXP extension board to get the extra PWM pins from there.

[GeeTwo]

If you're running two servos (as opposed to two motor controllers), make sure your 6V and 0V wires are big enough to carry the current to drive both servos; don't use a 26AWG PWM cable.

[nlt5]

Great! Thanks for the help and advice.