Sami07
22-02-2016, 19:24
Team 3044 (0xBE4) developed a breakout board for the Talon SRX motor controller used with FIRST FRC robots. We did this for the following reasons:
*The flying leads provided on the Talon created awkward wiring layouts.
*Making use of the breakout port on the Talon for limit switches or encoders required use of a ribbon cable, which also contributed to awkward wiring layouts.
Here is the dropbox link for the description
(https://www.dropbox.com/home/3044/2015-2016/Talon%20SRX%20Breakout%20Board?preview=Talon+SRX+B reakout+Board+Description+160220.pdf)
Otherwise, feel free to email me at mccombse16@gmail.com for the Talon SRX Breakout Board Description PDF. I hope this can help people out, it definitely helped my team. Enjoy :)
Team 3044 Breakout Boards (http://www.team3044.com/index.php/team-resources/electrical)
*The flying leads provided on the Talon created awkward wiring layouts.
*Making use of the breakout port on the Talon for limit switches or encoders required use of a ribbon cable, which also contributed to awkward wiring layouts.
Here is the dropbox link for the description
(https://www.dropbox.com/home/3044/2015-2016/Talon%20SRX%20Breakout%20Board?preview=Talon+SRX+B reakout+Board+Description+160220.pdf)
Otherwise, feel free to email me at mccombse16@gmail.com for the Talon SRX Breakout Board Description PDF. I hope this can help people out, it definitely helped my team. Enjoy :)
Team 3044 Breakout Boards (http://www.team3044.com/index.php/team-resources/electrical)