2014 Driver Station software

[zippy36jr]

So I am bringing back our 2014 robot back from the dead and working on another small project on the side with the CRio and I can not find the 2014 driver station. If anyone knows where I could find it, it would be appreciated.

[dubiousSwain]

So I am bringing back our 2014 robot back from the dead and working on another small project on the side with the CRio and I can not find the 2014 driver station. If anyone knows where I could find it, it would be appreciated.

I am not in front of a computer with a DS right now, but on the settings tab of the DS, you can switch protocols. Using the older protocol might work.

[cpapplefamily]

I am not in front of a computer with a DS right now, but on the settings tab of the DS, you can switch protocols. Using the older protocol might work.

I too was looking at the 2014 OPTION. The driverstatation only had 50% connection with the crio. The crio was before my time. I don't recall the error we had. Something like "robot controller and driverstatation not able to communicate "the indicator on the DS was 50% green

[Ben Wolsieffer]

I too was looking at the 2014 OPTION. The driverstatation only had 50% connection with the crio. The crio was before my time. I don't recall the error we had. Something like "robot controller and driverstatation not able to communicate "the indicator on the DS was 50% green

When using the 2016 DS with the cRIO, the half green/half red connection indicator means the robot is connected. It never is fully green when using the 2014 protocol.

[spat]

Well, you can still download the FRC 2014 software using the following links:

- NI Software for FRC 2014 (http://download.ni.com/support/softlib/labview/labview_frc/NI_FRC2014.zip)
- FRC 2014 Update Suite (http://download.ni.com/support/softlib/first/frc/FileAttachments/FRC2014UpdateSuite6.00.zip)

Greetings!