Log in

View Full Version : Image Discuss: 810 - Teaser

CD47-Bot
20-01-2003, 23:02
[cdm-description=photo]14534[/cdm-description]
JVN
20-01-2003, 23:02
So... Mike....

I'll bite. What's it do? C'mon, I won't tell anyone...
:D

Can't wait to see you guys... Good luck!
Joe Matt
20-01-2003, 23:04
If you turn it 90 degrees to the right, please?
AJ Quick
20-01-2003, 23:14
Maybe it creates suction?
Suneet
20-01-2003, 23:18
Yeah, looks like the plate in the back pushes out the one on the front. Are there suction cups in the front? But it looks a little too complex for that. Humn...
Wetzel
20-01-2003, 23:37
It goes at the bottom of the robot.
And it is upside down.


Wetzel
~~~~~~~~~~~
0_o
Rickertsen2
20-01-2003, 23:54
I wish we had a mill.
Hmm a globe driving a lead screw. What could it be?? are those 2 cylinders pnumatic rams?
Madison
21-01-2003, 11:08
Wetzel is 50% correct.

The rest of you are not even remotely close.

:)

That's all I'll say for now. I don't want to release any more pivotal information about our strategy.

;)
Greg Ross
21-01-2003, 11:57
Originally posted by M. Krass
Wetzel is 50% correct.

The rest of you are not even remotely close.

:)

That's all I'll say for now. I don't want to release any more pivotal information about our strategy.

;)
PIVOTal?
Madison
21-01-2003, 13:17
Originally posted by gwross
PIVOTal?

It's not what you're thinking.

It's better.
Jnadke
21-01-2003, 14:18
Originally posted by M. Krass
It's not what you're thinking.

It's better.


CAN CRUSHER V3.0!!!!!!
Cory
21-01-2003, 14:48
/me drools

Very purdy Maddie:p

Wanna tell me what it is?

Cory
Matt Attallah
21-01-2003, 17:29
Well, my guess would have to be some sort of pusher.

Look at the globe motor. Too slow to create a fast-enough suction-repeatedly, but high enough torque to push other robots/things.

Some sort of top-of-ramp defender or pusher-off-thingy? (like my wording!)


Some more hints available?!?!
DaBruteForceGuy
21-01-2003, 21:59
Originally posted by Matt Attallah
Some more hints available?!?!

Hmmmm, we'll have to think about that one, wtdya think Michael, should we give'm another one... u know for good times sake??:rolleyes: :D
minisimon
23-01-2003, 00:06
It could be meant to lift up the robot; if so, it's on its side. The screw would move the plate and two tubes down. If the tubes have suction cups on them, this would make a good stick to top of ramp mechanism. Who knows (other than them, of course)
sevisehda
24-01-2003, 00:19
I see some kind of hinge above the motor. The part I want to get a look at is the small object in the lower left corner of the opening. It looks big and heavy by the look of it. 12"x3"x8" at least. My guess its something to flip over the bars.