View Full Version : drill motor mounting
While taking inventories of our parts, the drill motor mounting bracket fell off a table and broke. I just want to know if there is anybody out there who has a mounting bracket that they are not using. Also, in our kit there was only one left hand bolt that goes into the drill motor transmission. If someone can let me know where I can get another one of those, I would appreciate it.
Greg Needel
27-01-2003, 12:34
in the book some where it talks about buying extra parts from frist so I would look for that as for the lefthand screw I would order them from MSC and order extras cause you can;t find those at lowes
Richard Wallace
27-01-2003, 16:05
To get the reverse screws go to your nearest Skil Bosch service center. The part number is 2610 908 940. Should be $0.55 each. For other drill parts see the link below, or order directly from Bosch by phoning 908.769.8208.
http://www.toolpartsdirect.com/cgi-bin/schematic.cgi/bosch/3360.561
The mounting brackets are made for FIRST by MMH. They can sell you new ones using an order form that you can get on the FIRST site.
nosvamos
03-02-2003, 08:24
Lefthand bolts for the drill motors can be purchased from a
Bosch or Skil Power Tool Store.
Ken
Team #557
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.