Programming

[Gusman1188]

How do I change the PWM Lables so that
PY_1=PWM1
PY_2=PWM2
PY_1=PWM3
PY_2=PWM4

Its currently setup too
PY_1=PWM1 and PWM13
PY_2=PWM2 and PWM 14

[Jankenpoe]

I think it's related to the SEROUT command - the placement of the PWM variables in the output; watch how you are using the Drive_R and Drive_L variables.

[ChrisA]

Originally posted by Gusman1188
How do I change the PWM Lables so that
PY_1=PWM1
PY_2=PWM2
PY_1=PWM3
PY_2=PWM4

Its currently setup too
PY_1=PWM1 and PWM13
PY_2=PWM2 and PWM 14
I'm not exactly sure what you are asking here.... maybe you could elaborate.

[Gusman1188]

OK, heres what I mean, We have 4 motors and and they are on PWM's 1, 2, 3, and 4.(1 and 3 are Left Drive and 2 and 4 are right Drive. The Program that I have (another one of our programmers made but I cant contact) drives 1 and 13 as the left drive and 2 and 14 as the right drive. how do I change it to the right way?

Any help would be great.

-Chris

[boostaddict]

you need to change the serout... ie
Serout USERCPU, OUTBAUD, [255,255,leftdrive,relayA,rightdrive,relayB,leftdri ve,rightdrive... hope this helps...

[Joe Ross]

The easiest way is to move the PWM cable to 13 and 14.

This is what I would recommend with 28 hours left and no programmer in sight.