Cory
25-02-2003, 22:34
Some facts about our 2003 robot:
*2 speed, servo shiftable drive
*Speeds approx 2-4 fps in low, 8-10 fps in high
*Stacker can stack on top of one box, or lift from the bottom and
stack numerous boxes, stacker is untested at the moment.
*Stacker arms rotate from full back in the start position to approx. 60-90* in the forward position
*Arms are used to knock over the wall at start of match.
*Arms have a wingspan of approx. 7.5 feet
*window motors rotate arms
*arms can grab box in multiple orientations
*Lifter lifts to 33"
*Unique lifting mechanism hopefully prevents binding
*Arms can corrall large numbers of boxes.
*5 optical sensors sued for line tracking
*2 sensors used for an odometer to help with dead reckoning
*Weight=approx 120-125lbs
Before everyone goes crazy, yes i know the light is in a bad place, that will be taken care of, I also know we have no number plates, that is taken care of too. We have sweet laser cut orange polycarb plates with cutouts filled in with blue lasercut polycarb numbers/school names. Unfortunately I have no pics of them.
Any suggestions/comments/criticisms welcome
Gallery of 100's bot (http://photos.yahoo.com/bc/team100cory/lst?.dir=/robotics&.view=t)
Newest pics are at the end
Pic 1 (http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=4165)
Pic2 (http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=4166)
Pic3 (http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=4165)
Cory
*2 speed, servo shiftable drive
*Speeds approx 2-4 fps in low, 8-10 fps in high
*Stacker can stack on top of one box, or lift from the bottom and
stack numerous boxes, stacker is untested at the moment.
*Stacker arms rotate from full back in the start position to approx. 60-90* in the forward position
*Arms are used to knock over the wall at start of match.
*Arms have a wingspan of approx. 7.5 feet
*window motors rotate arms
*arms can grab box in multiple orientations
*Lifter lifts to 33"
*Unique lifting mechanism hopefully prevents binding
*Arms can corrall large numbers of boxes.
*5 optical sensors sued for line tracking
*2 sensors used for an odometer to help with dead reckoning
*Weight=approx 120-125lbs
Before everyone goes crazy, yes i know the light is in a bad place, that will be taken care of, I also know we have no number plates, that is taken care of too. We have sweet laser cut orange polycarb plates with cutouts filled in with blue lasercut polycarb numbers/school names. Unfortunately I have no pics of them.
Any suggestions/comments/criticisms welcome
Gallery of 100's bot (http://photos.yahoo.com/bc/team100cory/lst?.dir=/robotics&.view=t)
Newest pics are at the end
Pic 1 (http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=4165)
Pic2 (http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=4166)
Pic3 (http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=4165)
Cory