Bosch Drill Motor [Archive]

rmmlg

12-12-2003, 11:16

Does anyone have either a CAD model of the Bosch Drill motor or its dimensions? Either would be greatly appreciated.
Thanks,
Ryan

petek

12-12-2003, 11:48

Go to www.firstcadlibrary.com

Ed Sparks

12-12-2003, 12:50

Does anyone have either a CAD model of the Bosch Drill motor or its dimensions? Either would be greatly appreciated.
Thanks,
Ryan

I should have a model posted shortly of last year's drill motor along with some other new models and some IGES translations - probably by Monday morning.

Tristan Lall

12-12-2003, 12:52

Actually it's not there yet; Ed Sparks said he was going to make one in the near future. He does have a CAD of the pinion of that motor, though (10 tooth, 0.7 module, 20° pressure angle).

Edit: Speak of the devil--he beat me to it....

Ed Sparks

15-12-2003, 08:07

The new Bosch motor is posted in the Motors Library. The pinion gear will be posted in a day or so. I'm working on an i-Gear model that will generate just about any spur gear you would want with optional hub and key.

Tdevree

16-12-2003, 17:16

The new Bosch motor is posted in the Motors Library. The pinion gear will be posted in a day or so. I'm working on an i-Gear model that will generate just about any spur gear you would want with optional hub and key.

Do you have a general date that you will finish the i-Gear model?

Ed Sparks

16-12-2003, 22:43

Do you have a general date that you will finish the i-Gear model?

I actually finished it today but I want a day or two to see if I can break it. Look for a post around Thursday-Friday. :ahh:

rmmlg

17-12-2003, 14:33

Thanks for putting the motor up on the library. That helped us a lot.