Specs on Drill Motor Gear

[JoeJ]

What are the specifications on the gear that is pressed on the gear motor?

[Joe Johnson]

Try searching on "drill motor gear" see what you get.

About 40 messages, at least 3 of which have the information you want.

Joe J.

[Ken Leung]

After doing a quick search...

"Before you ask, the drill motor is a standard, 0.7 module, 20 degree pressure angle, full depth gear. " -Joe J

http://www.chiefdelphi.com/forums/showthread.php?s=&threadid=1635

Should've been part of the newsletter, but some how I managed to skip that... Oh well. Posted in here so people can see it for a while before this post will be pushed back by new ones.

[Wayne Doenges]

Speaking of the drill motors.
Does anyone know the thread size of the center of the tranny coupling? We can see it's a left-handed thread but we have no screws with left-handed threads. We are mounting a gear directly to the output shaft, but need a screw to secure it.
Any help would be appreciated.

Wayne Doenges