Drill Motor Mount Dimensions

[Vincent Chan]

Could anyone give me the measurements for the holes on the drill motor mounts? (A quick diagram in paint would be nice, too, but I need the numbers more than anything.) Our robotics room is locked right now, and we need to drill the holes in the chassis for it.

EDIT: I should specify, I need the distance apart for the holes on the plastic mount that came in the kit. I also need one number relating the holes to the center of the output shaft.

Thanks muchly.

[_GP_]

Could anyone give me the measurements for the holes on the drill motor mounts? (A quick diagram in paint would be nice, too, but I need the numbers more than anything.) Our robotics room is locked right now, and we need to drill the holes in the chassis for it.

EDIT: I should specify, I need the distance apart for the holes on the plastic mount that came in the kit. I also need one number relating the holes to the center of the output shaft.

Thanks muchly.

unfortunately I am not in the shop so i cant meassure and tell you, but if you have access to inventor, i would suggest you use the drawings at FIRST CAD Library (http://www.firstcadlibrary.com/)

hope this helps