funny arial stunts?

[jacob_dilles]

once our robot grabs the bar, we have "pinball flippers" that we flap just because... its histericaly funny :D .

[Ryan M.]

Were they designed to do that or do they have an actual function during the game? :) When our robot raises itself we can flag our hopper open and closed. (Which is actually a possible defense if nessessary.) We never got our victory dance into autonomous mode, unfortunatly. ;)

--EDIT--
Necessary. Bad speeling day for me. ;)

[jacob_dilles]

lol yeah they push/heard the red balls into the chute. they are run off 2 globe motors, but when were hanging they look like little wings :D

[Madison]

Seriously, I was looking forward to crazy, kooky fun that we could have with fonts.

What a disappointment.

[Yan Wang]

once our robot grabs the bar, we have "pinball flippers" that we flap just because... its histericaly funny :D .

Sounds like Sparky last year at the top of the ramp ;) I never quite figured out what that bar was for...

[ArJubx]

At one point during our autonomous code programming, I had our bot pulling a wheelie for 5-6 feet.

[Craig]

we have a "skirt" as we like to call it on our bot. Basically an outer aluminum frame on pneumatics kinda like a car on fastbags. It goes up for climbing, and down for low clearance...anyway, while up in the air "lifting the skirt" is rather amusing!! :D

[ZZII 527]

We also have flippers...but ours our pneumatic and our lifter is pneumatic so to save air pressure we won't be using them...unless we have a lot of extra time. They are ball hearders but can also make it difficult for others to get to the bar.

[Aignam]

Theoretically, once our robot is able to attach to the bar, we can rock one of our joints to swing the robot back and forth... ;) So many possibilities...