Receiver to control unit connection

[Bob16]

we have re-built our Education Robot and we are trying to find out which connection to hook into. Can you help!! :)

[Billfred]

I'm afraid you'll have to be more specific...what are you trying to do? Which sets of connectors are you talking about?

[sanddrag]

Perhaps this PDF (http://innovationfirst.com/FIRSTRobotics/pdfs/EDU-RC-2004_Ref_Guide_2004-Jan-14a.pdf) will be of some benefit.

[Bob16]

We are using a three wire connector and we need to go from a 8 channel receiver to the control unit. I just need to know which R/C PWM IN to hook into from channels 2 and 3 on are reciever.

[Mark McLeod]

We are using a three wire connector and we need to go from a 8 channel receiver to the control unit. I just need to know which R/C PWM IN to hook into from channels 2 and 3 on are reciever.
See page 6 of the PDF Sanddrag posted.
You should also look at the 2004 EDU Default Software Reference Guide to see what each of the controls will do. The documents you need are on the IFI website http://innovationfirst.com/FIRSTRobotics/documentation.htm