Adambots-Live Linux Makefile -- version 0.1 RELEASE

[jdong]

https://sourceforge.net/project/showfiles.php?group_id=118894&package_id=130111&release_id=281942

Notes:
This is a makefile that can be used as a Linux-replacement for MPLAB.

--Features--
Parses any MPLAB project containing folder (i.e. default code) and finds all the .c / .h files to compile
Uses WINE in conjunction with mcc18.


--Requirements--
It assumes that there's a /opt/mcc18 folder containing mcc18 in the SAME STRUCTURE as the Windows C:\mcc18.
It requires WINE. I've tested with 20040615 and 20040716.
Indent and Fortune are optional, but recommended.
The ifi-pictools or ifi-picloader packages are required to load the code.

--Operation--
Copy this file to the folder containing your code. Issue the following commands to get started:

gunzip [name_of_makefile]
mv [name_of_makefile] Makefile
mkdir .conf .deps
touch .conf/dummy
touch .deps/dummy

At this point, edit the makefile to modify its variables. Excuse the user-unfriendliness... It'll be improved / autodetected at a later version

Type (make target) to make a target. Possible targets:

(nothing) -- Generates FrcCode.hex file by building everything
file.o -- Compiles file.o from file.c
clean -- Removes compiled files, forces rebuild next time
prettycode -- Indents/reformats code.
load -- Use picloader to load the Hexfile to /dev/ttyS0
read -- Read robot output from /dev/ttyS1 (requires picreader)



Please test & comment.
File bugs at : https://sourceforge.net/tracker/?group_id=118894&atid=683416

File improvements / patches at: https://sourceforge.net/tracker/?group_id=118894&atid=683418


Need help? https://sourceforge.net/tracker/?group_id=118894&atid=683417

[jdong]

You can track the live CVS developments at http://cvs.sourceforge.net/viewcvs.py/adambots-live/robotcode/code/Makefile

0.1 was CVS revision 1.10; there's always a few hours of ViewCVS lag with sourceforge

[Michael Auchter]

I'll be sure to check this out when I get home today. I would love to get away from my dependence upon windows for programming.

By the way, I was the kid from Team 61 talking to you at Berkley.

[jdong]

Note: Makefile in CVS now expects /usr/bin/picloader_console frontend (percentage display)

Get your copy at http://sourceforge.net/project/showfiles.php?group_id=118894&package_id=132159&release_id=281999

The console frontend still calls the ifi-pictools >=0.4.97 (0.5 beta 1) in the background. You still need the ifi-pictools package!!

[jdong]

Hmm, my Ubuntu Warty system used mawk, under which my awk expression worked. Under Ubuntu-development Hoary branch and apparently on some other distros, the makefile didn't work because it replaced all c's with .o! oops!

Corrected in release 0.1.1

https://sourceforge.net/project/showfiles.php?group_id=118894&package_id=130111&release_id=283489