Question about Parker Component

[theCowboyKnight]

WOOT! First post

Just a question, we are looking at using a pnumatic component from Parker, but we cant find anything about if we can actually use it. This is the link to part site: Here (http://www.parker.com/frameless/Default.asp?substDivId=&type=2&id=504&PSID=6002&PJID=0&GID=0&DivID=504&FamID=1081&RelPSID=&TechID=&BulkID=&TypeID=0)

Any help would be greatly appreciated.

[Cory]

Nope, can't use it. You're limited to normal cylinders, and rotary actuators.

<R90> There is no limit to the number of solenoid valves, air cylinders, pressure regulators, and connecting fittings you may use on your robot. They must, however, be “off the shelf” pneumatic devices rated by their manufacturers for pressure of at least 125psi. Besides the “free” pneumatic components listed on the Pneumatic Components Order form, you may purchase additional air cylinders or rotary actuators, however, they must be identical to those listed on the Pneumatic Components Order form, and obtained from a Bimba or Parker Hannifan distributor.

This year rather then faxing your order to HPE Automation you can go directly online and order them. Please go to www.bimba.com and click on the FIRST link and follow the instructions.